Through-Hole PCB Assembly

Through-hole and mixed SMT/THT assembly for prototypes and production.

Through-Hole and Mixed Assembly for Your Board

We assemble through-hole components and combine them with surface-mounted parts on the same PCB. Our services cover prototypes and production builds with connectors, relays, terminal blocks, leaded ICs and other leaded components.

Send your BOM, board files and assembly drawing. We review lead fit, component orientation, soldering access and thermal requirements before planning the assembly process.

Through-hole and surface-mounted components assembled on the same PCB.

Soldering Methods for Through-Hole Components

We support wave, selective and hand soldering. We select the method based on component limits, joint layout and assembly quantity.

Wave Soldering

We use wave soldering for through-hole joints with suitable layout and soldering access. We review board layout, solder-side components and any masking or pallet requirements before selecting this process.

Selective Soldering

We apply solder locally to selected through-hole joints. Nozzle access, nearby SMT components, pin spacing and board thermal demand are reviewed together to define the process.

Hand Soldering

We use controlled hand soldering for joints that need individual access or assemblies with limited through-hole content. Heat-sensitive parts require component-specific temperature and contact-time controls. Work instructions define component handling, soldering and inspection requirements.

Through-hole component leads and solder joints on the underside of a PCB.

Combine SMT and Through-Hole Components

Mixed technology combines SMT PCB assembly with through-hole insertion and soldering. We support surface-mounted components on one or both sides, with through-hole parts fitted in the required locations.

A typical sequence is SMT placement and reflow, SMT inspection, through-hole insertion and soldering, then final inspection and testing. Double-sided placement, heat-sensitive parts and special fixtures can change this sequence.

We plan the through-hole operation around underside components, board support and the permitted thermal exposure of the assembly.

Component Placement and Mechanical Fit

Through-hole assembly covers more than DIP packages. We assemble axial and radial components, pin headers, sockets, connectors, terminal blocks, switches, relays, transformers and other leaded parts.

Assembly drawings define polarity, seating height, stand-off, lead forming and trimming where required. Large parts or parts subject to mechanical loads may also need fixtures, fasteners or support specified in the design.

Identify parts supplied by your team and any positions to leave unpopulated. We can also source components as part of your PCB assembly order.

Through-hole pin header, terminal block, capacitor and axial resistor mounted on a PCB.

Engineering Checks Before Assembly

The board drawing and component datasheets define the dimensions and limits we need to review. Send special requirements with the initial enquiry.

Finished Holes and Leads

Compare the minimum finished plated-hole dimensions with the maximum lead dimensions, including their tolerances. Check pin pitch and hole positions across multi-pin parts. Use finished-hole dimensions after plating, not drill-tool diameter.

Soldering and Fixture Clearance

Review lead protrusion, nearby components, solder-side access and clearance for the selected nozzle or pallet. Include board-edge support and tooling requirements in the panel review.

Thermal and Material Requirements

Review component soldering limits, board thickness, copper distribution, solder alloy and flux compatibility. We establish preheat and soldering conditions for the actual assembly and selected process.

Placement and Acceptance

Confirm polarity, orientation, seating and lead-forming instructions. Specify the applicable soldering and acceptability standards, revisions, class and customer requirements before production.

Inspection and Test Requirements

We inspect component presence, orientation, seating and accessible solder joints against the approved assembly requirements. Through-hole inspection includes solder wetting, bridging, lead condition and compliance with the specified hole-fill criteria.

AOI can support visible-feature inspection where the component geometry permits. Electrical and functional tests are planned separately from visual acceptance, using the required circuit access, procedures and pass/fail limits.

Files for a Through-Hole Assembly Quote

Send the current design revision and mark any requirements that still need engineering input.

  • Gerber or ODB++ data, drill files and fabrication drawing
  • BOM with full manufacturer part numbers, quantities and supply responsibility
  • Assembly drawing showing orientation, DNP positions and special mounting instructions
  • Pick-and-place data for the SMT portion of a mixed assembly
  • Package drawings, finished-hole tolerances and lead dimensions where critical
  • Stand-off, lead-forming, trimming, fixture and fastening requirements
  • Build quantity, soldering restrictions, inspection criteria and test instructions

Through-Hole Assembly FAQs

Yes. We support mixed assemblies with SMT components on one or both sides and through-hole parts in the required positions. Send the BOM, placement data and assembly drawing so we can plan the sequence, board support and access for soldering.

No. We select wave, selective or hand soldering according to the joint layout, component limits and quantity. Tell us about any heat-sensitive parts or restrictions on solder exposure. Underside SMT components and access around each joint also affect the choice.

Yes. Mark the parts to fit and the DNP positions in the BOM and assembly drawing. Identify customer-supplied parts and provide a packing list with quantities and part numbers. We review packaging, shortages and any special preparation before assembly.

Yes. Send the files you have and identify missing details. We will explain which orientation, seating, lead-forming or mounting instructions are needed. Confirm these details before assembly, particularly for polarized parts and mechanically supported components.

We compare minimum finished plated-hole dimensions with maximum lead dimensions, using the board and component tolerances. For non-round leads, the full cross-section and insertion orientation matter. Include multi-pin pitch and alignment information. We also review the geometry and thermal requirements that affect solder fill.

We inspect component placement, polarity, seating and visible solder joints against the approved criteria. Electrical or functional testing can be included with an agreed procedure, circuit access and pass/fail limits. State the required standards, class and reports when requesting a quotation.

Discuss Your Through-Hole Assembly Project

Share your BOM, board files and mounting requirements. We will review the soldering process and assembly scope with your team.