Specify the IPC Requirements for Your Assembly
Tell us which IPC documents, revisions and product classes apply to your PCB assembly. Include any addenda, customer-specific acceptance criteria and required inspection records with your quote request.
Which IPC Document Applies?
| Document | What it covers | What to specify |
|---|---|---|
| IPC-A-610 | Visual workmanship criteria for completed electronic assemblies. | Document revision, product class and any additional workmanship criteria. |
| IPC J-STD-001 | Materials, processes and verification requirements for soldered electrical and electronic assemblies. | Document revision, product class and applicable process requirements or addenda. |
| IPC-A-600 and the applicable IPC-601x specification | Bare-board acceptability and performance requirements for the specified board construction. | Bare-board documents, revisions and class on the fabrication drawing or purchase specification. |
Record the Revision, Class and Addenda
Use the revision specified by the approved drawing or purchase specification. The IPC revision table lists J revisions for IPC-A-610 and J-STD-001. Confirm any revision change with the customer before release.
Class 1 is for general electronic products. Class 2 is for products that require continued performance and extended service life. Class 3 is for applications where continued or on-demand performance is critical. Confirm the class with the customer and check which base revision each addendum requires.
Turn Acceptance Requirements into an Inspection Plan
Identify what to inspect, the inspection method and the document that defines acceptance. State whether the checks apply to every unit or to a defined sample. For hidden joints such as those under a BGA, specify X-ray coverage, the applicable criteria and any required images.
When the order includes functional testing, provide the test setup, firmware, operating conditions and pass/fail limits. See our PCB testing and inspection services when defining the scope.
Resolve Drawing and Purchase Order Conflicts
If the drawing and purchase order cite different revisions, classes or acceptance limits, flag the conflict before production. Ask the customer to confirm which requirement governs. Record the decision and any approved exceptions in the released order documents before production.
For orders that include bare boards and assembly, list their requirements separately. Include each drawing revision so the fabrication and assembly teams work from the approved documents.
Purchase Order Wording You Can Adapt
Assembly acceptance. IPC-A-610 [revision], Class [1, 2 or 3].
Soldering requirements, when specified. IPC J-STD-001 [revision], Class [1, 2 or 3].
Additional requirements. Applicable addendum [document and revision]. Customer exceptions [document and revision]. Inspection coverage and required records [inspection plan and revision].
Replace the bracketed fields with your approved requirements. Include the assembly drawing and inspection or test plan with your PCB assembly enquiry.
IPC Standards for PCB Assembly FAQs
Ask the drawing owner which IPC document and revision the class refers to. Then record the full designation, revision and class in the drawing or purchase order. Add any soldering requirements, applicable addenda and inspection records that the order calls for.
Send the approved drawing and identify the H revision it specifies. Keep that revision in the quote request unless the customer approves a change. If you propose a newer revision, check affected acceptance criteria and addenda before updating the drawing and order.
List the BGA reference designators and the joints or areas to inspect. Specify inspection for every unit or give the sample size and selection rules. Cite the applicable acceptance document and limits, and state whether images must be linked to board serial numbers.
Put the applicable bare-board specification, revision and class on the fabrication drawing or purchase specification. Put the IPC-A-610 and any J-STD-001 requirements on the assembly drawing or assembly order. List the exact revision and class for each cited standard in the quote package.
Discuss Your IPC Assembly Requirements
Send your assembly drawing, order quantity and IPC requirements. Include the required inspection scope, reports and any customer-specific acceptance criteria.
