Glass PCB Manufacturing

Glass-Substrate Circuits for Optical and Electronic Designs

We provide glass PCB manufacturing for prototype and production projects. We review the glass grade, conductor pattern, optical requirements and assembly process together to define the construction.

Send your circuit artwork, dimensioned drawing and quantity. Mark the optical windows, critical features and installed conditions so we can review the manufacturing and acceptance requirements.

Choose the Glass and Circuit Structure Together

Glass circuits use an inorganic glass substrate to support patterned conductors. Options for review include borosilicate glass, soda-lime glass and fused silica, selected by grade for the optical, electrical and mechanical requirements.

These structures differ from glass-fiber-reinforced FR-4 and transparent polymer circuits. Metal pads and components can block light, while coatings can change transmission. Define the areas that must transmit light.

Glass circuit board with patterned metal conductors and component pads on a clear substrate

Glass Circuit Manufacturing Capabilities

ParameterCapability / optionApplicable construction
Glass thickness0.2–1.1 mmGlass-based Mini LED backlight constructions.
Single-piece dimensionsUp to 600 × 1200 mmGlass-based Mini LED backlight route; specify handling, flatness and assembly support.
Display pitchP0.5–P200.5–20 mm LED pitch for specified display constructions; not conductor spacing.
Minimum conductor width0.05 mmFine-pattern glass-circuit route; 0.05 mm is conductor width, not an assumed minimum spacing. Specify spacing and copper thickness separately.
Pad dimensions0.2 × 0.2 mmFine-pattern pad option; match the component and joining process.
Copper film thicknessUp to 50 µmSelected metallization route; do not apply the finest geometry to every copper thickness.
Optical acceptanceSpecified wavelength range, transmittance and hazeDefine the clear aperture, measurement method, viewing conditions and conductor/component coverage.
Holes and interconnectsMechanical holes or separately specified through-glass vias (TGVs)Identify the hole function, geometry, metallization and required electrical connection.

Keep the Optical Window Clear in the Finished Assembly

Glass circuit layout with a defined optical window kept clear of metal traces, pads and components

Define the wavelength range, clear aperture, required transmittance and haze where relevant. Include the viewing angle, coatings and surface-quality requirements needed for your application.

Show copper, pads, adhesives and component shadows relative to that window. We review optical cleanliness and inspection zones with the complete layout rather than assessing only the unpatterned glass sheet.

Specify TGV as a Separate Interconnect Route

A mechanical opening through glass is not automatically an electrical via. Through-glass vias require an appropriate hole-forming and metallization process to connect the specified conductor layers.

For a TGV or glass-core packaging project, provide the glass grade, local thickness, hole profile, diameter, pitch and metal requirements. Define the required interconnections and verification separately from the large-format glass display construction.

Plan Metallization, Assembly and Mechanical Support

Components join to a compatible metal pad and finish, not directly to bare glass. Review conductor adhesion, joining materials, temperature profile and cleaning requirements with the specified glass and metallization system.

Support the substrate during handling and assembly, and define connector loads, mounting contacts and edge-quality requirements. Our PCB assembly services can be reviewed with the glass circuit order.

Cross-section showing a component on metallized glass supported by an assembly fixture

Match Verification to the Application

Inspection can include conductor geometry, continuity, isolation, dimensions and the specified glass-edge condition. Define limits for edge chipping and surface defects by location, together with crack rejection criteria. Optical tests need an agreed wavelength range, measurement area and finished-product configuration.

For RF circuits, specify dielectric data at the operating frequency and the required electrical measurements. Our high-frequency PCB services cover related material and construction reviews; a low-frequency glass data-sheet value is not a microwave performance result.

Files for a Glass PCB Quote

  • Circuit artwork, dimensioned outline, hole drawing and revision
  • Glass grade, thickness, local tolerances and surface requirements
  • Conductor materials, thickness, critical geometry and pad finish
  • Optical window, wavelength range, transmittance and haze requirements
  • Mechanical hole or TGV definition with connection and inspection requirements
  • Assembly profile, mounting support and installed environment
  • Quantity, acceptance limits and requested inspection records
  • BOM and placement data when assembly is included

If the grade or process is undecided, mark open choices and send the requirements already known. Our PCB fabrication team can review the proposed construction and identify the information needed for quotation.

Glass PCB FAQs

No. A glass PCB uses an inorganic glass substrate, while FR-4 uses glass reinforcement in an epoxy laminate. Select glass when the optical path or a defined material requirement justifies it. Compare conductor adhesion, interconnects, handling and assembly requirements before transferring an FR-4 design.

Not necessarily. Metal traces, pads, components and coatings can block or alter the optical path. Mark the required clear aperture and wavelength range, and specify transmittance and any haze limits for the finished configuration. Keep obstructing features outside that area and verify the populated assembly where required.

Start with optical wavelength, thermal expansion, electrical properties and the assembly process. Compare the named grade, thickness and coating system, then check compatibility with the conductor deposition and joining process. For RF work, provide frequency-specific dielectric data. For optical sensing, compare grade-specific transmittance at the required thickness and wavelength, with the specified surface quality.

Use the drawing to distinguish mounting or alignment openings from electrical connections. If conductors must connect through the glass, specify the via geometry, metal and connection requirements for a TGV review. Do not apply an FR-4 plated-hole rule or a display-panel feature size to the TGV process.

Agree on edge quality, handling fixtures and support before processing. Review the joining profile and thermal expansion of the glass, conductors, components and mounting structure. Keep connector and clamp loads within the assembly requirements. If cracking or pad lifting appears, hold the affected parts and record its location and process history, then review the support and joining process before another build.

Yes. Send the available outline, artwork, quantity and proposed glass thickness. Identify the optical window, intended wavelength and fixed mechanical requirements, and mark unresolved values. We can identify the material, patterning, assembly and inspection information needed to confirm the construction and quotation.

Discuss Your Glass PCB Project

Send your artwork, glass requirements and optical or electrical acceptance criteria. We will review the construction, assembly scope and records needed for your order.