Required Files for PCB Assembly

What to Send for a PCB Assembly Quote

Send your available board data, bill of materials (BOM), pick-and-place file and assembly drawings. Include the order quantity and tell us who will supply the components. If files are still in progress, tell us what is missing so we can identify what is needed to complete the quote.

PCB Assembly File Checklist

FileWhat to include
PCB manufacturing dataGerber files with drill data or ODB++ data. Include the board outline, relevant solder mask and paste layers, and the fabrication drawing if fabrication is in scope.
Bill of materialsReference designators, manufacturer names and part numbers, package, quantity per board, approved alternatives and do-not-populate (DNP) status for the selected build variant.
Pick-and-place fileReference designator, X and Y coordinates (mm or inches), coordinate origin, rotation angle and convention, and assembly side. Identify whether the coordinates refer to a single board or a panel.
Assembly drawingsTop and bottom views as applicable, polarity and pin 1 markings, and special assembly instructions such as connector orientation or hardware placement.
Programming and test instructions, when requiredApproved firmware version, connection and setup instructions, test conditions, pass/fail limits and required records.

Identify the Boards and Parts You Will Supply

If you need fabrication and assembly, include the stack-up, finish and critical fabrication tolerances. If you are supplying bare boards, send the matching board data and identify the board revision, available quantity and whether they arrive as single boards or panels.

For full or partial turnkey orders, identify the parts Topline should source. For customer-supplied parts, list the corresponding reference designators, quantities and packaging, and state how shortages and unused parts should be handled.

PCB panel beside sealed reels of surface-mount components on an assembly bench

Match the BOM, Placement Data and Drawings

[下载图片](C:/Users/28901/Documents/ChatGPT/TP建站/pcb-assembly-file-requirements/images/pcb-component-placement-review.webp) Technician comparing an assembled circuit board with a component placement view on a monitor.

Use a release list to identify the approved revision of each file. Check that fitted reference designators match across the BOM, placement data and assembly drawings. Mark all DNP positions for the selected build variant and reconcile any conflicting placement entries before release.

Check polarity, pin 1 and rotation against the assembly drawing. For double-sided boards, document the bottom-side coordinate and rotation convention from the export.

Release Programming, Test and Change Instructions

Include the approved firmware file and version, programming interface and verification steps when programming is in scope. For functional tests, provide fixture or harness requirements, supply and load settings, and measurable pass/fail limits.

When a file changes, identify what it replaces and send any other files affected by the change. Confirm the complete release package before production.

Assembled circuit board in a spring-probe test fixture with a USB adapter and wiring harness

Submit Your File Package

Group the current files in one ZIP and label it with the board part number and release revision. In the quote request, state the order quantity, sourcing scope and any files still pending.

See our PCB assembly services, design for assembly review and testing and inspection services for details on the work to include.

PCB Assembly File FAQs

Yes. Send those files with the order quantity and sourcing scope. Tell us whether the placement file and assembly drawings are still in progress. We can identify what else is needed for a complete quote and production release.

Send the available board data and assembly drawings, and tell us which CAD tool you used. If you can access the CAD project, export the centroid or component placement file for the approved variant. Check that it contains the reference designator, X/Y position, rotation and board side. If an export is unavailable, we can review what placement data is still needed.

Check the approved build variant to confirm whether the position should be fitted. If it is DNP, mark the reference designator in the BOM and assembly drawing, then regenerate the placement file for that variant if possible. If the entry remains, flag it for exclusion and confirm it during placement review.

Send the BOM and a packing list that identifies the supplied part numbers, corresponding reference designators, quantities and packaging. Identify shortages by part number and reference designator. Confirm any extra quantity needed for assembly and how unused parts should be returned.

Yes, if the approved release list identifies which versions belong together. List the exact filename and revision of each file. When replacing a file, identify the superseded version and confirm whether the BOM, placement data or drawings also need updating.

Ready to Submit Your PCB Assembly Files?

Send your available files, build quantity and sourcing requirements. Include any questions about missing files or the production release.