Immersion Tin PCB Finish

A flat tin finish for solderable pads and specified press-fit applications.

Flat Tin-Finished Pads for Your PCB

We provide immersion tin PCB finishes for prototype and production orders. Also called white tin, this finish deposits a thin layer of tin directly on exposed copper through a chemical displacement process.

The flat surface suits fine-pitch solder lands and specified press-fit applications. Send your board files, assembly sequence and expected storage period so we can review the finish before production.

Fine-pitch silver-white tin-finished solder pads on a bare green PCB

Where Immersion Tin Fits

Select the finish for the pad layout, connector requirements and manufacturing schedule.

Fine-Pitch SMT

Flat tin-finished pads support solder-paste printing for dense layouts. Review the pad geometry, solder-mask openings and assembly process for the actual component package.

Press-Fit Connections

Immersion tin can be used for qualified press-fit applications. The connector specification, finished hole geometry and insertion process must be reviewed together.

Controlled Production Schedules

Coordinate PCB fabrication with component availability and the assembly schedule. Storage time and thermal exposure affect the tin available for later soldering.

Rows of tin-finished plated through holes on a bare green PCB

Match the Finish to Your Press-Fit Connector

For press-fit boards, provide the connector part number, pin specification and finished-hole drawing. Include hole tolerances, copper plating requirements and the applicable insertion and retention criteria.

We review the finish alongside the hole construction and connector requirements. A tin-finished hole alone does not establish press-fit reliability.

Identify areas that remain unsoldered after assembly. Mechanical stress and exposed tin need to be included in the product reliability review.

Define the Tin Specification and Acceptance Tests

Define the coating requirements at delivery and the solderability required after the planned storage and heating.

Thickness and Measurement

Specify the deposit thickness limits, units, measurement locations and sampling. Agree on the method and reporting basis for the selected process.

Free Tin and Intermetallic Growth

Copper and tin react to form an intermetallic layer. Storage and heating change the coating, so total tin thickness alone does not show how much usable tin remains for soldering.

Standard and Order Requirements

If IPC-4554 is required, name the adopted version and amendment. The official catalogue lists it as no longer maintained. Agree on the version and customer requirements that apply to the order.

Solderability Verification

Define the test method, conditioning and acceptance criteria. Include any storage or thermal exposure that the test samples need to represent.

Plan Storage and Every Soldering Step

Immersion tin can support multiple soldering operations when the finish and assembly route are qualified for them. Provide the reflow profiles, intervals between operations and any later wave soldering, selective soldering or rework.

Keep boards in the supplied protective packaging and avoid touching exposed pads. Record the fabrication date, packaging opening date and thermal history.

Tell us the expected time between fabrication and assembly. We review your PCB assembly plan to agree on the storage period and soldering sequence for the selected finish.

Flat silver-white tin-finished SMT lands on a bare blue PCB

Include Tin Whiskers in the Reliability Review

Tin whiskers are conductive growths that can create a short-circuit risk. Review the exposed tin and the end-use requirements before choosing the finish.

Application Requirements

Identify fine-pitch areas, long service life and any customer restrictions on exposed tin. Include mechanically stressed press-fit interfaces in the review.

Process and Qualification

Agree on the process controls, qualification evidence and test criteria needed for the product. Evaluate whisker risk for the exposed tin under the intended service conditions.

Alternative Finishes

Where the product specification restricts tin, review an alternative finish with the design and reliability teams. Mark solder lands and other contact areas separately.

Choose Between Immersion Tin and Other Finishes

The finish should meet the assembly and contact requirements for the board.

Immersion Tin and HASL

Immersion tin deposits a thin tin layer chemically on copper. HASL applies molten solder and levels it with hot air, producing a different surface profile. Specify the required finish explicitly on the fabrication drawing.

Immersion Tin and OSP

Immersion tin leaves a metallic tin surface. OSP protects copper with an organic film. Compare storage, assembly heat exposure and contact requirements before changing the finish.

Immersion Tin and ENIG

ENIG uses nickel and gold rather than tin directly on copper. Review the required soldering interface, storage plan, contact function and reliability criteria when selecting between them.

Files for an Immersion Tin PCB Quote

Send the available manufacturing data and mark any undecided requirements.

  • Gerber or ODB++ data, drill files and fabrication drawing
  • Board dimensions, layer count, material and finished thickness
  • Immersion tin thickness requirements and adopted standard version
  • Measurement, solderability and reporting requirements
  • Assembly profiles, soldering sequence and expected storage period
  • Connector specification and finished-hole requirements for press-fit boards
  • Quantity, delivery target and any tin-whisker restrictions

See our PCB fabrication services and lead-free PCB finish options for related manufacturing requirements.

Immersion Tin PCB Finish FAQs

Keep the lot separate and share the fabrication date, packaging condition, opening date and storage records. We can review the history with your assembly team and agree on any solderability testing or approved reprocessing needed before release. A clean appearance alone does not establish that the finish remains suitable.

Check whether the report describes the original deposit or the condition after storage and heating. Review the test locations, thermal history, handling and flux condition. Send the report, pad photographs and reflow profile so the remaining solderable tin and the assembly process can be investigated together.

Yes, when the selected finish and complete assembly route are qualified for those operations. Provide the profiles, number of heating operations, waiting times, solder alloy and flux. Confirm the required solderability at the final operation before releasing the production plan.

Send the connector part number, pin specification, finished-hole size and tolerance, hole copper requirements and board thickness. Include insertion and retention criteria and any connector qualification requirements. We review these together with the tin finish and any exposed-tin reliability restrictions.

Send the end-product specification and identify any restrictions on exposed tin, including press-fit areas. We can review the required process controls, qualification evidence and acceptance tests with your team. If the specification prohibits exposed tin, have the design and reliability teams approve an alternative finish before updating the drawing.

Do not use a generic bake or cleaning recipe. Set the lot aside and share the exposure history, photographs and board details. Baking can accelerate copper-tin intermetallic growth, while cleaning can affect the surface. Agree on the assessment, any approved treatment and the required solderability verification before assembly.

Discuss Your Immersion Tin PCB Requirements

Share your files, finish specification and assembly schedule. We will review the immersion tin requirements and quotation with your team.