Quality Requirements Defined Before Production
Topline Circuit checks materials, assembly processes and finished PCB assemblies against the agreed order requirements. We review the production files, acceptance requirements and inspection scope before releasing the job to production.
Send your critical dimensions, applicable specifications and required records with the quotation request. We identify missing details and clarify conflicting instructions before preparing the production requirements.
Start with the Approved Files and Materials
The assembly package identifies the board revision and build variant. It includes the approved BOM, placement data, assembly drawing and any programming instructions.
Incoming checks compare the supplied materials and components with the order requirements. We submit proposed substitutions and design changes for your approval when required. We wait for approval before using them in production.
PCBA Quality Control from Incoming Parts to Final Release
| Assembly stage | What we check | Records and actions |
|---|---|---|
| Incoming parts | Check part identity and condition against the approved BOM and sourcing instructions. | Hold affected material if a part is damaged, mismatched or awaiting substitution approval. |
| First-article inspection | Check the board revision, assembly variant, placement and polarity against the released files. | Record the agreed first-article checks and obtain approval before continuing when the order specifies a hold point. |
| Printing, placement and soldering | Check solder paste, component placement and solder joints at the stages defined in the control plan. | Record findings and verify any adjustments before continuing with affected assemblies. |
| Inspection and testing | Check the specified visual, electrical and functional requirements, including firmware revision where applicable. | Record results against agreed limits and link them to the required lot or unit identifiers. |
| Rework and release | Verify that required checks are complete and any rework has passed the applicable reinspection or retest. | Document the disposition of affected units and verify that the required records are ready for shipment. |
Match the Control Plan to the Product
The assembly control plan covers component identity, placement, polarity, solder joints and specified electrical behavior.
Define the applicable specification, revision and acceptance class where required. List the acceptance limits and inspection coverage for each critical feature. For sampled checks, specify how to define the lot, how many assemblies to inspect and what results trigger acceptance or rejection. For checks required on every unit, list the characteristics to verify and the results to record.
Inspection and Test Requirements
Optical inspection, X-ray, electrical measurements and functional tests provide different evidence. Select the methods and limits that match the assembly layout, component packages and functions to verify.
Our PCB testing and inspection services explain the available methods. The order requirements define which checks, records and acceptance limits apply to your project.
Request Records That Match the Order
Tell us which lot references, board identifiers and material or component records you need. We confirm the available traceability scope and documentation format during the order review.
Requested records may include assembly inspection reports, X-ray images, electrical test results or functional test logs. Specify the required board or lot identification so the records can be matched to the delivered products.
Contain Problems and Verify the Next Action
When a nonconformance is identified, affected items are held for review against the approved requirements. The next action may be clarification, authorized rework, replacement or another agreed disposition.
Reworked items are inspected and retested using the applicable steps before release. Where corrective action is required, we review the cause and the changes needed to address recurrence.
Prepare Your Quality Requirements
- Approved board and assembly files with revision identifiers
- Applicable specifications, revisions and acceptance classes
- Critical assembly dimensions and tolerances, electrical test conditions and pass/fail limits
- Inspection coverage, sample size and lot acceptance criteria, plus any first-article approval hold points
- Required reports, identifiers and traceability scope
- Change approval, rework restrictions and packaging requirements
Request any current certification documents needed for your supplier review and identify the scope you need verified. Quality-system certification, product recognition and order-specific inspection records serve different purposes.
Quality Control FAQs
Send the released BOM, placement file and assembly drawing with matching revisions. Include the acceptance specification and revision, the required class if applicable, and any critical limits. For functional tests, provide the supply voltage, load, firmware revision and expected results where applicable. List any required reports and approvals.
Include the approved BOM, placement data and assembly drawing with your quote request. Identify the critical checks, the evidence you need and who approves the first article. State whether production must pause until you approve it.
Request unit-level traceability before production. Provide the serial number format, marking location and report format. List the fields to link to each serial number, such as the test procedure revision, measured values and pass/fail result. We confirm how serial numbers will be captured and linked to results during order review.
We hold the affected lot and review the finding against the agreed sampling plan. If the findings meet the lot rejection criteria, we agree on the next action with you, such as sorting, rework or replacement. Tell us in the purchase order which rework needs your approval. After authorized rework, we repeat the applicable checks and record the results before release.
State the approved revision on each order and identify any changes from the previous build. Keep the assembly drawing, placement data and BOM consistent. Define which substitutions or process changes need approval so repeat production does not rely on an outdated file or an assumed equivalent.
Set aside the affected items and retain their packaging labels and lot references. Send the order number, board revision, quantities, defect locations, photos and any measurements or test results. Include relevant assembly or operating conditions so the cause and the required containment, rework or replacement can be reviewed.
List the records you need when requesting a quote, such as a first-article report, X-ray images or functional test logs. State whether you need records for each unit or each lot, and list the required fields and file format. We confirm the deliverables and reporting scope during order review.
Discuss Your Inspection and Release Requirements
Send your BOM, assembly drawing, acceptance criteria and required reports. We will review the inspection stages, traceability and release requirements for your quotation.
