PCB Milling and Routing Services

Board Profiles and Cut-Outs Built to Your Drawing

Topline Circuit provides PCB milling and routing for custom outlines, internal cut-outs, non-plated slots and mechanical clearances. We support prototypes and production with mechanical-data review, fabrication and inspection.

Send your finished dimensions, critical tolerances and mating-part requirements. We review the profile, tooling access and panel support before confirming the manufacturing plan.

Custom Outlines, Slots and Internal Cut-Outs

We machine the board profile and internal openings to suit connectors, housings and other mechanical features. Identify each cut-out and slot in the mechanical data so the intended material removal is clear.

Specify whether each slot is plated or non-plated. A non-plated cut-out provides mechanical clearance; a plated slot also requires a conductive wall and the appropriate fabrication sequence.

Top view of a routed PCB showing a custom outer profile, a rounded internal cut-out and a non-plated slot

Define the Finished Geometry

FeatureWhat to specify
Board profileFinished outline dimensions, drawing datums and critical dimensional tolerances.
Internal cut-outFinished boundary, position and inside corner radii, with the removed area clearly identified.
SlotFinished width, overall end-to-end length, position, orientation and plated status.
Feature alignmentPosition requirements relative to holes, connector pads or the mechanical datum.
Material and thicknessBoard construction and thickness needed to review cutter access, rigidity and support.
Edge conditionLimits for burrs, exposed fibres and tab remnants at functional edges.

Plan for Rounded Internal Corners

Top-view detail showing the radius left by a round milling cutter at an internal PCB cut-out corner

A rotating round cutter leaves a radius at an internal corner. For conventional contour milling, that radius cannot be smaller than the cutter radius. The required radius, slot width and board thickness affect the tool selection and machining route.

Provide the mating-part envelope if a square tab or housing feature must fit. We can review a larger opening, suitable corner relief or a different fit requirement with you before the design data is changed.

Keep Copper Clear of the Machined Edge

Define the edge-to-edge distance from retained copper to the finished routed boundary, including each internal cut-out. Review the milling position tolerance with adjacent tracks, planes, pads and mounting features.

Where copper is intentionally exposed or plated at an edge, identify that construction separately. An ordinary profile callout does not specify edge plating or a solderable plated slot.

Position Panel Tabs Away from Critical Fit Surfaces

Routing tabs hold the boards in the panel during handling and assembly. Define the delivered form as individual boards or an assembly panel, and identify connector edges or housing interfaces where tabs are unsuitable.

Agree on tab locations, mouse-bite holes where used and acceptable remnants after separation. Check nearby components and copper with the chosen depaneling method.

Top view of two routed PCBs retained in a panel by tabs, with mouse-bite holes on selected tabs and a marked edge without tabs

Provide the Finished Boundary, Not an Assumed Cutter Offset

Use a clear, closed board outline and complete internal contours. State whether each supplied line represents a finished edge or a tool-center path; avoid duplicate or conflicting contours.

For finished-boundary data, we select the cutter compensation and machining sequence. If a supplied routing file already contains tool compensation, identify it so the offset is not applied twice.

Files for a PCB Milling Quote

  • Gerber or ODB++ data with a clearly identified profile and internal mechanical features
  • Drill and slot data with plated and non-plated features identified
  • A dimensioned drawing with datums, finished dimensions and critical tolerances
  • Material, stack-up, board thickness and copper clearances
  • Panel layout or delivered-form requirements and restricted tab locations
  • A mating-part drawing where fit is critical, order quantity and required inspection records

Our PCB DFM review checks the mechanical features with the production data. See our PCB fabrication services for the complete board manufacturing scope.

PCB Milling and Routing FAQs

A round milling tool leaves an internal radius. Compare the specified corner radius with the mating-part drawing. If a square feature interferes, review a larger cut-out or an approved corner-relief shape rather than assuming a smaller tool alone will produce a sharp corner.

Send the finished boundary and dimensions unless a specific routing-data format has been agreed. We generate cutter compensation for the selected tool. If your file contains a tool-center path or an existing offset, label it explicitly to prevent double compensation.

Mark the plated status in the fabrication drawing and the drill or routing output. State finished width and overall length. Do not rely on copper-pad presence alone to communicate plating; a non-plated opening may also pass through a copper area.

Compare the measured outline, cut-out positions and corner radii with the approved drawing and enclosure tolerances using the same datums. Check tab remnants and burrs at the interference point. If the board meets the drawing but still does not fit, review the combined board and enclosure tolerances and corner clearances. Set aside boards that fall outside the approved dimensions. Send the measurements, drawing revisions and photos so we can review rework or replacement. Do not file a critical edge before checking nearby copper and the approved repair method.

Keep them away from critical mating edges, connector interfaces and sensitive nearby components. Provide any assembly handling or fixture constraints. Agree on the tab layout, separation method and allowed edge remnants before panel production.

Identify the conflicting dimension or contour and confirm which revision defines the required finished board. We clarify the discrepancy before production and submit any proposed correction for approval. Keep the drawing, outline and drill or slot data consistent in the released package.

Review Your PCB Mechanical Requirements

Send your board files and mechanical drawing. We will review the profile, internal features and critical dimensions and prepare a manufacturing quotation.